MOTO GUZZI V7 CLASSIC Specifications download pdf (Page 92)

•

Be careful not to damage the O-Ring

during extraction.

•

Press the bearing tube inside the

wheel holder fork leg.

•

Remove the preload tube and the

spring.

•

Drain out all the oil inside the stem.

NOTE

FOR EASY DRAINAGE OF THE OIL INSIDE THE PUMPING

MEMBER ROD, PRESS THE STEM IN THE WHEEL HOLD-

ER SLEEVE TO PUMP OIL OUT.

•

Carefully check each part of the stem

and make sure that there are no dam-

aged elements.

•

If there are no damaged or worn ele-

ments, refit the stem; otherwise, re-

place the damaged elements.

NOTE

FOR EASY DRAINAGE OF THE OIL INSIDE THE PUMPING

MEMBER ROD, PRESS THE STEM IN THE WHEEL HOLD-

ER SLEEVE TO PUMP OIL OUT.

Disassembling the fork

•

Drain all the oil from the stem.

•

Block the wheel holder fork leg on the

vice.

•

Undo the bottom screw and remove it

with the corresponding gasket.

Suspensions V7 Classic

SUSP - 92

Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 133 134

No comments

MOTO GUZZI V7 CLASSIC Specifications Page 92