Checking the components
•
Check every component removed from
the fork leg, specially: the sealing ring
and the dust guard as they are ele-
ments that guarantee sealing; replace
them if some of them are damaged.
•
Check the bushing on the bearing tube;
remove it and replace it if damaged or
worn.
•
Slide off the pumping member unit
from the holding tube; if it is damaged,
replace the counter spring and the ring.
Reassembling the fork
CAUTION
ALL COMPONENTS MUST BE CAREFULLY WASHED AND DRIED WITH COMPRESSED AIR BE-
FORE REFITTING.
•
Carry out any necessary service oper-
ation.
•
Insert the pumping member unit with
the counter spring and the ring in the
bearing tube.
•
Check that the upper guide bushing is
fitted on the wheel holder fork leg.
Suspensions V7 Classic
SUSP - 94
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Comments to this Manuals